Below are the 3D Models used in the Scrambler PVC Launcher kits. Standard PVC connectors can be used instead. Standard PVC connectors require glue which can made modifications or repairs very difficult. These were created to allow teams to assembly a launcher without glue and later modify the launcher if needed.
The original kits used PET-G filament. Other plastic materials like PLA will work just a well. I have found PET-G offers the best strength and easiest to print. I recommend testing your printed parts to verify you are comfortable with the strength. The 3D printer settings will effect this greatly. We make no promises that any models below are strong enough. How a 3D printer is configured and the material used will effect the model’s strength.
There are two types of files available for download. The STL files which are 3D definition files. Most 3D printers do not accept these type of files. A conversion or slicing program must be used before most 3D printers can print these models. Consulate your 3D printer manual for more information.
Tee 90 Degree Connector 1/2in PVC
Note: Through hole allows this 90 degree connector to be used as a sliding tee for easier assembly.
Corner Connector 1/2in PVC
Double Tube Mount 1/2in PVC
Pusher Slide 1/2in PVC
Pusher Slide String Clamp
Pulley Support – Inline
Pulley Pin Support
Pulley
Pencil Starter Holder
Falling Mass Container – 2kg
Note: Recommended to be filled with Steel BBs. Must be distributed equally within the container.
Falling Mass Container – 1.5kg
Note: Recommended to be filled with Steel BBs. Must be distributed equally within the container.
